Table of Contents
Advertisement
Landing the Array
Landing an array is simply a reversal of the rigging procedure outlined above, lowering the array and guiding the bottom four cabinets into
a WPL transport cart, unpinning the lower block of four, and repeating with the top four cabinets.
Lower the array to a convenient working height. Disconnect the speaker cables. Position a WPL transport cart underneath the array and
remove the top and supporting poles.
Lower the array until it is just above the cart (fig. 67).
Raise the front of the cart and pin it in position to the front of the array (fig. 68).
WPL USER GUIDE V1.0
Copyright © 2019 Martin Audio Ltd.
47
WPL USER GUIDE
fig. 67
fig. 68
Advertisement
Table of Contents
