Editing The Audience Region - Martin Audio MLA MINI Advanced User's Manual

MLA MINI
DISPLAY 2.2

EDITING THE AUDIENCE REGION

If you didn't get either the start or finish points correct it is easy to adjust them by using the
Move Coverage Marker buttons, either the green one for the start position or the red one for the
stop position.
Just click on either of the buttons and move the cursor to the correct position, the triangle
marker will move for whichever point you are adjusting without disturbing the other. When you
have the point in the correct new position click again to finalise it.
You can also delete the audience region entirely but clicking on the 'Add Audience' button again
automatically deletes what you have already entered allowing you to start again, or click on the
Delete Audience button which removes the audience region you have drawn but you have the
option to re-draw a new region at a later time.
Assuming you have drawn an accurate representation of the venue (and remember that the more
accurate the D2 project, the better the audible results), you have now finished entering the
venue slice and can click on 'Done' to close the window.
MLA Mini Display 2.2 V1.0
113