Add The Audience Region - Martin Audio MLA MINI Advanced User's Manual

MLA MINI
DISPLAY 2.2
the array will be positioned on stage, if the x position were 6m the array would be on the floor.
For MLA Mini systems a grey box will appear above the array if flown with sub has been selected:
Or below the array if stack with sub has been selected:
It shows the space occupied by the MSX subs. The size of the rectangle expands depending on
how many MSX may possibly be above the MLA Mini, one for four Mini, two for eight Mini and
so on. The rigging tab allows accurate calculations when this mode is selected as we will see.

ADD THE AUDIENCE REGION

Now you need to determine the audience area that we need to cover. Click on the Add Audience
button:
Then hover over the slice drawing. You will see a green inverted triangle moving left and right
along the slice outline corresponding to the left and right movement of your cursor. Position the
triangle where the audience position starts and click once. Now move the cursor to the right
tracing the slice along the audience area and you will see a green line following your movement
with a red inverted triangle at the end of the line. When the red triangle is over the furthest point
of the audience region click again and the audience area is defined. Don't worry at this point that
it includes underneath and on the front of balconies et cetera that is corrected at the next stage.
MLA Mini Display 2.2 V1.0
112