Optimise Eq's - Martin Audio MLA MINI Advanced User's Manual

MLA MINI
DISPLAY 2.2

OPTIMISE EQ'S

Once we are happy with the goals we have set we can start the optimisation process by clicking
the Optimise button;
The Optimisation starts with low frequencies and moves up, displaying the result on the upper
index plot as well as showing plots for the response in the audience and non audience areas.
As we have given the audience a high priority we can see the individual measurement points
previously wildly varied, starting to cluster much closer together. We have requested a start to
finish differential of +/- 3dB and the spread of magnitude certainly looks close to 6dB. The non-
audience plot shows that the response is still quite varied which is expected as it was low priority
on our goals setting. The lowest plot shows how close to the requested goal each of the three
parameters has got to as a percentage. The levels closely match the relative importance that was
allocated to each of the three objective functions, target in green is close to 100%, hard avoid
in blue hovering around 80% and non-audience around the 50% mark.
Here is the finished optimisation:
MLA Mini Display 2.2 V1.0
146