Show Mode - Martin Audio MLA MINI Advanced User's Manual

MLA MINI
VU-NET

SHOW MODE

Show mode is designed to offer a degree of protection once set-up is complete and a show
has started to prevent the user from muting part of the system accidentally. With Show Mode
inactive during set-up, all mutes can be used as and when required with a simple mouse click;
the array will mute and unmute instantly under command of the button. When Show Mode is
activated, clicking a Mute button anywhere in the system will bring up a confirmation window:
The window is slightly different for a zone mute:
If you definitely want to mute the array, zone or speaker, click 'Yes' or press Return. If you
accidentally clicked on a Mute, click 'No' and the window will disappear with no change to the
mute state.
Un-muting part of the system could also potentially be destructive so a similar message will
prompt you to confirm the action:
Note that the Master system Mute on the toolbar is not affected by Show Mode, as it is so
destructive it always produces a prompt to verify that you wish to proceed.
MLA Mini Vu-Net V1.0
244