Coverage / Current Best Optimised Output - Martin Audio MLA MINI Advanced User's Manual

MLA MINI
DISPLAY 2.2

COVERAGE / CURRENT BEST OPTIMISED OUTPUT

Prior to starting the optimisation this shows the coverage diagram with the array shown with all
angles at the default 0.5°. Note that the white lines from the top and bottom of the array are the
acoustic centres of the top and bottom cabinets, NOT the furthest points of the coverage which
will be 3.25° beyond the upper line and 3.25° lower than the bottom line for MLA or 10° lower
if MLD are used at the bottom of the array. For MLA Compact and MLA Mini it will be 5° higher
and 5° lower. The lines are not intended to show the vertical coverage, just where the array is
actually mechanically pointing by default.
When you start the optimisation process which window switches to an index plot showing in real
time the acoustic performance as different inter cabinet angles are tried:
This gives you an instant comparison to the Current Acoustic Output; essentially a "before" and
"after" to see how manually articulating the array has improved the coverage.
MLA Mini Display 2.2 V1.0
124