Editing; Inputs A / B; Gain; Delay - Martin Audio BlacklineX SERIES User Manual

BlacklineX
Enter the correct password and press the Enter Button [10]. Turn the Edit2 [8] or Edit3 [9] Control to scroll between Password
: Disable [default] and Password :
When enabling, a symbol resembling a padlock will appear in the lower‐right area of the LCD Display [6]. Pressing the Utility
Button [12] here returns you directly to the User Password splash screen.
When disabling, the padlock symbol disappears and the processor will return to the Security Utilities splash screen.
The password will need to be entered to make any changes once the DX0.5 has been locked and password enabled. Therefore,
make a note of the password and keep it somewhere safe. If the password is lost, you will have to perform a factory reset to
restore the unit's default settings [see page 13].
Editing
Each input and output has an assortment of powerful parameters used to optimize the loudspeaker system. Changes made in
editing mode occur in real time.
To edit an input or output, press and hold the desired Edit Button [13] until that input or outputs blue LED [14] illuminates. Press
and hold again to take it out of edit mode.
Inputs A / B:
Engaging Edit on Input A, Input B, or both simultaneously allows you the opportunity to edit the following:

Gain

Delay

EQ Bypass

5‐Band EQ
1. The Nav/Edit1 Control [7] is used to navigate between Gain, Delay, EQ Bypass and 5‐Band EQ. The DX0.5 recalls where
you are, so scroll the Nav/Edit1 Control [7] until you see the parameter you want to edit.
2. The ESC button [11] is used to disengage Editing and return to the previous menu.
3. The Enter Button [10] is used to enter and edit the chosen feature.
Press the Enter Button [10] to enter the currently selected input processing parameter. An arrow –> will appear next to whatever
setting is ready to be edited: Gain, Delay, EQ Bypass or EQ Bands 1 – 5.
Gain
The input gain allows you to adjust the entire system levels up and down. This is where to compensate for variations in the signal
level of the program material from your signal source
Press the Enter button [10] to enter and edit the gain. An arrow –> will appear next to Gain indicating that it is ready to be
edited.
Use the Edit2 [8] or Edit3 [9] Controls to change the gain by ±0.1 dB per click. Turning these Controls clockwise increases gain,
while turning them anticlockwise decreases gain. The gain ranges from –15.0 dB to +15.0 dB.
Press the ESC button [11] to exit the gain editing mode.
Delay
Setting up input delays on the DX0.5 is useful for time aligning components of a system either to each other or to the live
instruments or both.
Press the Enter button [10] to enter and edit the delay. An arrow –> will appear next to Delay indicating that it is ready to be
edited.
As stated on page 14, Delay may be represented in one of three ways:

Time(ms), or

Distance(m) [default], or

Distance(feet)
BlacklineX User Guide V1.0
USER GUIDE
Enable. If changing, press the Enter Button [10] only once here.
36