Table of Contents
Advertisement
4.2.4 REGISTERED Mode — IP NETWORK Functions
In order to use the REGISTERED mode functions is necessary to register the
instrument in the network, configuring the information needed to identify it, such as IP,
Netmask and Gateway (refer to section 4.2.1). If you are not registered in the network
you will be able to access these functions but they will be disabled.
To access the REGISTERED mode, in order to analyse network services.
1.- Press key
2.- Press softkey MODEM [F1].
3.- Press softkey IP NETWORK [F1].
4.- The instrument starts the registration process in the CMTS of the NETWORK.
On the display it will appear the word "TUNING" during the process. You must
wait a few minutes until it is registered. If registration process is right, it will
display the word "DONE" on the screen. Failure in registration process will be
displayed as an "ERROR IN REGISTRATION".
It is displayed the REGISTERED mode screen. At the bottom menu it is shown
each one of functions that you may use (Figure 18.-).
At the bottom of the screen it will appear next options:
BACK [F1]:
VoIP [F2]:
IPTV [F3]:
Page 34
[13].
DOCSIS/EuroDOCSIS REGISTRATION 01:43:09
FR: 128.50 MHz
IP CABLE MODEM:
IP GATEWAY:
NETMASK:
IP TOD SERVER:
IP TFTP SERVER:
CONFIGURATION FILE:
TUNING
BACK
VoIP
IPTV
Figure 18.- Registered mode Screen.
Back to the previous screen MODEM.
It checks the VoIP service (refer to section 4.2.4.1).
It checks the TV over IP service (refer to section
4.2.4.2).
USER'S MANUAL. PROMAX-27
CH:
S04
/ CCIR
192.9.100.252
192.9.100.1
255.255.255.0
192.9.100.248
192.9.100.204
---
PING
TRACE
07/2008
Advertisement
Table of Contents
