Operation Instructions - Promax 27 User Manual

USER'S MANUAL. PROMAX-27
4.2

Operation Instructions

The five main functions of PROMAX-27 are accessible from the initial menu,
pressing the key
1. MODEM MODE:
2. TV MODE:
3. GENERATOR MODE: This option allows you to generate a signal test to check the
4. CONFIG MODE:
5. SETUP MODE:
To access any of these menus, press
then press the corresponding key ([F1], [F2], [F3], [F4], [F5]) that are found in the lower
frame selection [12].
Pressing the hotkey
regardless submenu in which we are.
Figure 3.- Main menu with SOFTKEYS or programmable keys.
07/2008
[13]:
This option allows you to check the response of a data
transmission system DOCSIS / EuroDOCSIS. It works on
both uplink and downlink. It can store and display the
measures obtained from the constellation in QAM modulation.
It also performs tests on applications using IP protocol over
cable (for details see 4.2.3 and 4.2.4).
This option has three submenus: Analog TV, Digital TV and
SLM(Signal Level Meter). In these modes we can make the
analysis of analog carrier and digital video carrier, as well as
the demodulation of the audio carrier (for details see 4.2.5).
upstream traffic (for details see 4.2.6).
In this menu you can set basic parameters of the analyser (for
details see 4.2.2).
This menu allows you to introduce basic data concerning the
system such as time, date and language among others (for
details see 4.2.1).
[13] the instrument will always lead to the start menu,
CABLE TV & IP ANALYSER
CMTS
MODEM TV GTOR
[13] to access the start menu and
01:43:09
IP
CONFIG SETUP
Page 13