Setup Mode - Promax 27 User Manual

USER'S MANUAL. PROMAX-27

4.2.1 SETUP Mode

To access the SETUP mode for configuring system:
[13].
1.- Press key
2.- Press softkey SETUP [F5].
It will appear a screen with the configuration parameters of the system
(Figure 5.-).
To change the status or value of a parameter:
1.- Use the cursor keys
2.- Go to the parameter you want to modify and press the selection key
3.- The cursor will move next to the parameter value. Now you can change that value
using the cursor or the alphanumeric keypad (depending on the case).
4.- After you have made your changes, press again the selection key
changes.
5.- To exit Configuration Mode and return to the main menu, press again the MENU
key [13]
07/2008
Figure 5.- SETUP Screen.
[7] to scroll along the menu.
[8].
[8] to save
Page 15