Tv Mode - Promax 27 User Manual

USER'S MANUAL. PROMAX-27
SEND [F2]:

4.2.5 TV Mode

To access the TV mode for CATV measurement:
1.- Press key
2.- Press softkey TV [F2].
The TV function includes three different operation modes: Analogue, Digital and
SLM (Signal Level Meter). Next we explain measurements of each mode.
Analog TV Video Meter:
- Video carrier level.
- Carrier / Noise Ratio (C/N).
- Video / Audio Ratio (V/A).
Digital TV Power Meter:
- Channels Power by Integration.
- Carrier / Noise Ratio (C/N).
- Bit Error Rate (BER).
- Modulation Error Ratio (MER).
- Constellation Diagram.
Signal Level Meter (SLM):
- Select the Tone, AM, FM and volume regulation.
- Power level Channel.
Once in TV mode, to change the measurement mode you should press the
softkey [F1].
MNS / DIGITAL
/ ANALOGUE [F1]:
At the top of the screen you can read in which mode you are.
Next we are going to explain each one.
07/2008
Sends the PING.
[13].
Changes among the three TV measurement modes.
Page 43