Table of Contents
Advertisement
4.2.5.3
SLM mode
To access the Signal Level Meter from TV mode, press [F1] until you see at the
top of the screen "SIGNAL LEVEL METER" (see Figure 27.-).
The SLM mode (Signal Level Meter) provides the power level of the tuned
channel in a numerical way and in a graph bar with a resolution of one dB. By the
loudspeaker it will emit a pitch tone, which changes relating to the level.
In this mode, measures on the screen are next:
LVL:
FR:
CH:
At the bottom of the screen you will see next options:
DIGITAL [F1]:
TONE / AM / FM /
OFF [F2]:
SPECTRUM / SCAN [F3]:
Page 50
SIGNAL LEVEL METER
FR:
MHz
CH: C31/CCIR
20
30
40
50
60
70
DIGITAL
TONE
SPECTRUM
Figure 27.- SIGNAL LEVEL METER screen.
Power signal level.
Channel tuned frequency.
Channel and plan channel.
It leads to the Digital TV Power Meter.
Pressing this key you can navigate among these four
options. These options are for change the sound heard
by the speaker of the instrument. With TONE you will
heard a tone, which changes depending on the signal;
FM, to listen to Frequency Modulation radio signal; AM,
to listen to Amplitude Modulation radio; OFF, to mute
speaker.
It goes to SPECTRUM function (refer to section
4.2.5.4.2) / SCAN function (refer to section 4.2.5.4.1).
USER'S MANUAL. PROMAX-27
01:43:09
72
LVL
dBuV
80
90
100 110 120
LOGGER
VOLUME
07/2008
Advertisement
Table of Contents
