Common Functions In Tv Mode; Scan Function - Promax 27 User Manual

USER'S MANUAL. PROMAX-27
LOGGER [F4]:
FREQ / VOLUME /
CHAN [F5]:
4.2.5.4

COMMON FUNCTIONS in TV mode

Next we are going to explain the functions that are common to the three TV
modes.
4.2.5.4.1

SCAN function

To access the SCAN function:
1.- Press key
2.- Press softkey TV [F2].
3.- Press softkey [F1] to select the mode you want to work DIGITAL / ANALOG /
SLM.
4.- Press softkey SPECTRUM / SCAN [F3].
5.- Press key SCAN [F4] (if coming from SPECTRUM screen).
This function is the same one than the SCAN function in MODEM mode. For
more details refer to section 4.2.3.3.
At the bottom of the screen are shown the following options:
SPECTRUM [F1]:
DIGITAL [F3]:
TILT [F4]:
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com
07/2008
Through this function you can store measurements in
the memory of the instrument for later viewing, printing
or transfer to a PC (refer to section 4.2.5.4.3).
Pressing this key you can navigate among editable
parameters. To change them, use the Cursor keys or
the alphanumeric keypad as appropriate. FREQ for
changing the frequency value of the tuned channel,
VOLUME to increase or decrease the sound volume
heard by the speaker of the instrument, CHANNEL for
changing the channel of the channel plan.
[13].
It leads to the SPECTRUM screen (refer to section
4.2.5.4.2).
Returns to the main screen "DIGITAL TV POWER
METER" (refer to section 4.2.5.1).
It leads to TILT screen (refer to section 4.2.5.4.4).
Page 51