Features - Sony BRC-X1000 Operating Instructions Manual

Features

Pan/Tilt/Zoom CMOS video camera
equipped with a small built-in pan-tilt
head
• The camera unit is equipped with a 1.0-type Exmor R
×
sensor and an optical 12 zoom lens with pan/tilt/zoom
features integrated into a small built-in pan-tilt head. This
versatile camera can be used for various applications.
• The pan-tilt head can pan to the right or left by ±170 degrees
and tilt upward to 90 degrees and downward to 30 degrees,
which allows the camera to remotely shoot wide areas.
• The camera pans and tilts smoothly, even at low movement
speed.
• The camera pans and tilts quietly, even at its maximum speed of
60 degrees per second.
High sensitivity and high resolution from
built-in 1.0-type CMOS image sensor
With the built-in highly photosensitive 1.0-type Exmor
®
R CMOS sensor, high resolution shooting with less
noise can be achieved. Highly sensitive shooting unique
to the large sensor can be achieved. In addition, the
camera is equipped with a ZEISS Vario-Sonnar T* built-
in lens.
Supports multi-format
3840 × 2160/29.97p (2SI)*
1920 × 1080/59.94p, 1920 × 1080/59.94i, 1280 × 720/
59.94p
3840 × 2160/25p (2SI)* 1
1920 × 1080/50p, 1920 × 1080/50i, 1280 × 720/50p
Switching possible with the SYSTEM SELECT switch
1
* Compatible only with the BRC-X1000
®
CMOS
1
Equipped with 3G-SDI and HDMI output
The camera can deliver 4K output for both Dual Link
3G-SDI × 2 (2SI) and HDMI.
Various installation environments are available in order
to establish a connection with HDMI, in addition to the
coaxial cable.
Equipped with PoE+ (Power Over
Ethernet Plus)
The camera is compatible with PoE+ (Power Over
Ethernet Plus), so a single LAN cable can be used for
power provision and control.
Adopting VISCA Camera Protocol
• The camera is equipped with a RS-422 communication
interface. The camera supports the industry-standard VISCA
camera protocol. Hence, a maximum of seven cameras can be
connected and remotely operated with high communication
speed (38,400 bps).
• Remote controller (not supplied) allows easy camera
operations.
Compatible with VISCA over IP protocol
An IP connection can be established between the camera
and the remote controller.
Equipped with External Video Sync Function
The camera is equipped with an external video sync
function to synchronize the camera images on multiple
cameras.
Equipped with Tally Lamp Function
The camera is equipped with a Tally lamp that quickly
distinguishes when the camera is in use.
The front Tally lamp is a large Tally lamp used for
improving visibility. The camera is also equipped with a
Tally lamp behind the camera block, in order to improve
visibility from the rear side.
6