Zoom Buttons; Power Button; Back Light Button - Sony BRC-X1000 Operating Instructions Manual

Color video camera
Hide thumbs Also See for BRC-X1000:
Table of Contents

Advertisement

Notes
Press the MANUAL button and adjust the focus
manually when shooting the following objects.
• White walls and other objects without contrast
• Objects behind glass
• Objects with horizontal stripes
• Objects on which bright lights are cast or reflected
• Nightscapes and other dark objects with blinking
lights
• Lit objects shot with darkened exposure
adjustment or exposure compensation settings
C DATA SCREEN button
Press this button to display the main menu PAGE.
Press it again to close the menu. If you press the
button when a lower-level menu is selected, the
display goes back to a higher-level menu.
Notes
• You cannot perform pan/tilt/zoom operations
while the menu is displayed.
• The menus are output through MONITOR OUT
and HDMI OUT.
When you want to display the menus, turn on the
OSD switch on the back of the camera.
D PAN-TILT button
Press the arrow buttons to pan or tilt the camera.
Press the HOME button to face the camera back to
the front.
When the menu is displayed, use V or v to select the
menu items and B or b to change the set values.
Display the menu of selected items with the HOME
button.
The selected setting menu is displayed by pressing
the HOME button when the main menu is displayed.
E L/R DIRECTION SET button
Hold down this button and press the REV button to
change the direction of the camera movement to be
opposite the direction of the arrows on the B and b
buttons. To reset the direction of the camera
movement, press the STD button while holding
down this button.
F POWER button
Press this button to turn on power or to put the
camera in the standby mode.
G BACK LIGHT button
Press this button to enable backlight compensation.
Press it again to disable backlight compensation.
Note
The BACK LIGHT button is enabled when MODE
in the EXPOSURE menu is FULL AUTO,
SHUTTER Pri, IRIS Pri, or GAIN Pri.
H POSITION buttons
Hold down the PRESET button and press button 1 to
6 to store the current camera direction, zoom, focus
adjustment and backlight compensation in the
memory of the pressed number button.
To erase the memory contents, hold down the
RESET button and press button 1 to 6.
Notes
• These buttons do not function when the menu is
displayed.
• Some memory contents may not be erased even if
you use the RESET button.
For details on items that can be stored by the
PRESET button and erased by the RESET button,
see "Preset Items" (page 53).
I PAN-TILT RESET button
Press this button to reset the pan/tilt position.
J ZOOM buttons
Use the SLOW button to zoom slowly, and the
FAST button to zoom quickly.
Press the T (telephoto) side of the button to zoom in,
and the W (wide angle) side to zoom out.
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brc-h800

Table of Contents