Sony BRC-X1000 Operating Instructions Manual page 18

6
Attach the wire rope for fall prevention to the ceiling
bracket (A).
Put the wire rope through the fitting for wire rope of
the ceiling bracket (A) and securely attach it to the
bracket using the supplied stainless steel screw
(3 M4 × 8).
Wire rope (supplied)
3M4 × 8 (supplied)
Caution
Use the supplied screw. Otherwise, the wire rope
may not function properly.
Fitting for wire rope
Ceiling
bracket (A)
7
Aligning the a hole in the front of the ceiling
bracket (A) to the
push in the camera unit, and turn the camera with the
ceiling bracket (A) clockwise to temporarily secure
the camera.
Ceiling
mark
Align
a mark
8
Secure the ceiling brackets (A) and (B) using
supplied three screws (3 M3 × 8).
Ceiling
18
hole of the ceiling bracket (B),
Ceiling
bracket (B)
1
Ceiling
bracket (A)
2
3M3 × 8
(supplied)