Connections - Panasonic UF-5500 Service Manual

UF-5500 / 4500
8.2.

Connections

Power Cord
Plug the supply cord into the main
AC socket outlet.
Connect the supply cord coupler
into the main supply inlet on
the rear of the machine.
Warning: This apparatus must
be properly
grounded. Do not
modify the AC outlet.
Power Cord (Included)
USB Cable (Optional) (USB 2.0): UF-5500 Only
For connecting a USB Cable when using your
machine as printer and/or scanner.
External Telephone
(Optional)
You can connect an
additional standard single
line telephone to the machine.
To connect the telephone, break off the protective
tab on the TEL jack.
If using an External Telephone option with the
machine, the machine does not detect the external
telephone being in use.
When sending a Fax, ensure the external
telephone is hung up before dialing.
Warning:
• To assure continued emission limit compliance;
–
use only shielded USB cable (Example:Hi-Speed USB 2.0 certified cable).
– use only shielded LAN cable (category 5 straight cable).
• To protect the unit, use only shielded USB cable in areas where thunderstorms occur.
Telephone Line Cable
Telephone Jack
(Included)
88
LAN Cable (Optional) : UF-5500 Only
For connecting a LAN Cable when
using your machine as printer, scanner
and/or PC Fax.
Telephone Line Cable
Plug one end of the telephone line cable
into the telephone jack supplied by the
telephone company and the other end
into the LINE jack on the left side of the
machine.
Do not extend the telephone line cord.
In the event of problems, you should
contact your equipment supplier in the
first instance.