12.20.2. Left Side Section(2)
Detail Dressing of LEAD
Cram the core and ADF/SENSOR_LEAD into the opening.
OPERATION_LEAD
ADF/SENSOR_LEAD
Harness must not come out above this line.
Don't touch and pass ADF/SENSOR_LEAD between IC400 and IC300.
ADF/MOTOR_LEAD
RELAY/CIS_LEAD
Pass OPERATION_LEAD above ADF/SENSOR_LEAD.
233
< N G >
IC 4 0 0
IC 3 0 0
Pass the each LEAD through in this figure.
Procedure
1) Insert RELAY/CIS_LEAD.
2) Insert ADF/SENSOR_LEAD.
3) Insert OPERATION_LEAD.
4) Insert ADF/MOTOR_LEAD.
UF-5500 / 4500