Service Mode; Base Unit - Panasonic KX-FC265CX-S Service Manual

KX-FC265CX-S

11 Service Mode

The programming functions are used to program the various features and functions of the machine, and to test the machine.
This facilitates communication between the user and the service man while programming the unit.

11.1. Base Unit

11.1.1. Programming and Lists
11.1.1.1. Operation
There are 2 basic categories of programming functions, the User Mode and the Service Mode. The Service Mode is further bro-
ken down into the normal and special programs. The normal programs are those listed in the Operating Instructions and are
available to the user. The special programs are only those listed here and not displayed to the user. In both the User and Ser-
vice Modes, there are Set Functions and Test Functions. The Set Functions are used to program various features and functions,
and the Test Functions are used to test the various functions. The Set Functions are accessed by entering their code, changing
the appropriate value, then pressing the SET key. The Test Functions are accessed by entering their code and pressing the key
listed on the menu. While programming, to cancel any entry, press the STOP key.
Note:
When changing the set values on the service function table, they should not be set beyond the local regulation.
Follow the laws and regulations of your area.
11.1.1.2. Operation Flow
62