Configurations - Record DFA 127 User Manual

Operating instructions
Key (S1):
This is a multifunctional key.
The selection of the function is carried out by the control LED according to the fol-
lowing table:
Release key while:
st
1 light pulse on LD1
nd
2 light pulse on LD1
rd
3 light pulse on LD1
th
4 light pulse on LD1
th
5 light pulse on LD1
th
6 light pulse on LD1
th
7 light pulse on LD1
th
8 light pulse on LD1
th
9 light pulse on LD1
Press key for approx. 13 seconds
*
Learn spring type must be carried out without connection to the door leaf!
(Before initiating this function, the arms must be dismounted, i.e. the door leaf
must not be connected to the operator!).
If a control unit is changed, this function must be initiated!
**
In order to definitively carry out this function, a Reset must be initiated within 9
seconds (for example, with BDE-D, FPC 902, Test box). This can also take
place on the DFA 127 via an EMERGENCY STOP.
Page 24 of 55
Function:
AKI
Learn door parameters
Configuration mode on
* *
Learn spring type
Default parameter loading of door type
(TT)
** **
configuration
Hardware reset (new start of control)
12/2006 Rev. B
Factory setting of programming and
Manual DFA 127 Full Power