1
–
To print on colored paper, envelopes or letterheads, touch [↓], and then select the paper type.
–
If "4 × 6 w" is selected, the paper type is automatically set to "Thick 3".
–
If media other than postcards are inserted, select the appropriate paper type.
–
If label sheets are loaded, select "Thick 1".
–
Printing on OHP transparencies is possible only in black. When selecting OHP transparencies,
select the "Black" Color setting, and then select the paper type.
–
For details on selecting a setting for non-standard-size paper, refer to "Specifying a non-standard
paper size (Custom Size settings)" on page 6-9.
–
For details on selecting a setting for wide paper, refer to "Selecting a setting for oversized paper
(Wide Paper settings)" on page 6-13.
–
For details on special paper, refer to "Special paper" on page 6-3.
5
Touch [OK], and then touch [OK] in the next screen that appears.
The Basic screen appears again.
Reminder
Push the paper guides firmly up against the edges of the paper.
When loading postcards, load them in the w orientation, as shown in the illustration. Do not load
postcards in the v orientation.
A maximum of 50 postcards can be loaded into the bypass tray.
1-44
Before making copies
cm6520