Others Settings - Nikon Total Station DTM-322 Instruction Manual

Others settings

To open the Others menu, press
the Settings menu.
XYZ disp
2nd Unit
If you select US-Ft or I-Ft, an additional settings screen appears. Use this
screen to specify whether to display values in Decimal-Ft or Ft-Inch.
Sig Beep
Split ST
If you set the Split ST field to Yes, an additional setting screen appears. Use
this screen to specify the starting ST number.
CD Input
Owner's Detail Up to 20 characters.
B
Tip – To provide easier configuration for common regional settings, you can quickly configure
the Nikon total station to a pre-set combination of default regional settings. For more
information, see
B
Tip – The Nikon total station supports up to 3 languages on the instrument. For more
information on changing the language settings, see
[9]
Fast/Norm/Slow/+ENT
Defines speed to move to the next screen after
showing XYZ of the input PT
None/Meter/US-Ft/I-Ft
When the Secondary unit is set to a unit, an
extra display screen is available in the BMS,
stakeout observation screens, and 2-pt
reference line screens. The extra screen shows
the HD, VD, and SD in the secondary unit.
ON/OFF
No/Yes
Select Yes to separate the point numbers of
station points from other record type point
numbers
ABC/123
Sets the default input mode when a CD field
appears.
Enter your name or the name of your
company. If you enter a value in this field, it
appears at start-up.
Changing Regional Configuration Pre-sets, page
or select in
Other
page 21.
Total Station DTM-322 Instruction Manual
Menu Key
22.
5
1 0 9