Recording; Others Settings - Nikon Nivo Series Instruction Manual

5 Menu Key

Recording

To open the Rec menu, press
Settings menu.
Store DB
Data Rec

Others settings

To open the Others menu, press
the Settings menu.
XYZ disp
2nd Unit
If you select US-Ft or I-Ft, an additional settings screen appears. Use this
screen to specify whether to display values in Decimal-Ft or Ft-Inch.
Split ST
If you set the Split ST field to Yes, an additional setting screen appears. Use
this screen to specify the starting ST number.
11 6 Total Station Nivo Series Instruction Manual
or select
[8]
RAW/XYZ/RAW+XYZ
This setting determines whether raw and/or
coordinate data is stored when you record SS,
CP, or SO records in the Basic Measurement
Screen (BMS) or Stakeout screen.
Internal/COM
Set this field to COM to output data on the COM
port when you press [ENT] in the BMS or a
Stakeout screen. The data is not stored to the
job file. For more information, see
data to the COM port, page 85
[9]
Fast/Norm/Slow/+ENT
Defines speed to move to the next screen after
showing XYZ of the input PT
None/Meter/US-Ft/I-Ft
When the Secondary unit is set to a unit, an
extra display screen is available in the BMS,
stakeout observation screens, and 2-pt
reference line screens. The extra screen shows
the HD, VD, and SD in the secondary unit.
No/Yes
Select Yes to separate the point numbers of
station points from other record type point
numbers
in the
Angle
Outputting
or select in
Others