Table of Contents
Advertisement
Recording
To open the Rec menu, press
Settings menu.
Store DB
Data Rec
Others settings
To open the Others menu, press
the Settings menu. .
XYZ disp
2nd Unit
If you select US-Ft or I-Ft, an additional settings screen appears. Use this
screen to specify whether to display values in Decimal-Ft or Ft-Inch.
Split ST
If you set the Split ST field to Yes, an additional setting screen appears. Use
this screen to specify the starting ST number.
or select
[8]
RAW/XYZ/RAW+XYZ
This setting determines whether raw and/or
coordinate data is stored when you record SS,
CP, or SO records in the Basic Measurement
Screen (BMS) or Stakeout screen.
Internal/COM
Set this field to COM to output data on the COM
port when you press [ENT] in the BMS or a
Stakeout screen. The data is not stored to the
job file. For more information, see
data to the COM port, page 88
[9]
.
Fast/Norm/Slow/+ENT
Defines speed to move to the next screen after
showing XYZ of the input PT
None/Meter/US-Ft/I-Ft
When the Secondary unit is set to a unit, an
extra display screen is available in the BMS,
stakeout observation screens, and 2-pt
reference line screens. The extra screen shows
the HD, VD, and SD in the secondary unit.
No/Yes
Select Yes to separate the point numbers of
station points from other record type point
numbers
in the
Angle
Outputting
or select
in
Other
Nikon N Series/K Series Total Station Instruction Manual
Menu Key
5
1 21
Advertisement
Table of Contents
