Furuno FA-170 Installation Manual page 38

3. SETTINGS AND ADJUSTMENTS
3.5.1 How to set port priority
1. Access the [INITIAL SET] menu, following the procedure outlined in "How to ac-
cess the [INITIAL SET] menu" on page 3-1.
2. Select [PORT PRIORITY], then press the ENT/ACK key.
Selected item is
highlighted in
reverse video.
3. Select the sensor whose priority you want to adjust, then press
the ENT/ACK key. The [SENSOR PORT] pop up window is dis-
played.
4. Select the appropriate port, then press the ENT/ACK key.
5. Repeat step 3 to step 4 for other port priorities.
6. Press the MENU/ESC key to return to the [INITAL SET] menu.
3-8
PORT PRIORITY
PRIORITY LL/COG/COG
1st SENSOR1
2nd SENSOR2
3rd SENSOR3
4th COM4
5th COM5
6th COM6
7th LAN
: CURSOR : SELECT
ENT
HDG ROT
SENSOR3 SENSOR3
SENSOR1 SENSOR1
SENSOR2 SENSOR2
COM6 COM6
COM4 COM4
COM5 COM5
LAN LAN
: BACK
ENT
SENSOR PORT
SENSOR1
SENSOR2
SENSOR3
COM4
COM5
COM6
LAN