Yale HSA3400 Installation, Programming, Operating page 7

Keypad remote control
Remove the cover and insert the 3 AAA alkaline
batteries as shown. The 'Tx' LED will flash briefly
while components initialise.
Please note, the Home button on the operating
panel and the jumper switch inside (do not move)
have no function on this model.
Door/window contacts
1 Remove the cover of each door/window contact
by loosening the fixing screw.
2 Insert two AAA batteries into each detector as
shown. The indicator LED will flash briefly.
Magnet
Tamper
Jumper
switch
switch
Extension terminals
Tamper
switch
Learn/Test
button
Jumper
switch
www.ukpanels.com
Keyfob remote control accessory
Slide off the battery cover, insert the
23A/MN21 battery as shown, and replace
battery cover. Switch to 'on'.
On/Off switch
Smoke detector accessory
Remove the cover and insert the four AAA
batteries as shown.
Learn/Test button
Help button accessory
Remove the cover by loosening the fixing
screw and insert the 12V battery (supplied) as
shown. Please ensure you observe battery
polarity.
7