Related Manuals for Yale IA-230
Summary of Contents for Yale IA-230
- Page 1 Intruder Alarm Kit IA-210 IA-220 IA-230 Quick Start Guide The smarter way to protect your home.
- Page 2 Register your product to get products news and updates. 1. Go to Yale web site www.yale.co.uk/product-registration 2.Complete product information form 3.Activate your guarantee if you need extra accessories or spare parts please visit yale.co.uk Choose your package online at www.yalestore.co.uk/installation Date Choose your Agree a Date &...
- Page 3 (03) Install your system in a few easy steps. Please read through all of the steps shown below and then follow the detailed instructions in the following pages. See your box for kit content. Unpack your kit (p. 04-05) *Each kit contains different components, see your box for kit content. Plan your system (p.
- Page 4 2.1m Available with IA-210, IA-220 Kit or as accessory ~12m 110° Motion Detector Pet ~ 1.8 AC-PETPIR 2.1m Available with IA-230 Kit or as accessory 110° Max < 27 kg Door/Window contact AC-DC Keypad AC-KP How to + PIN CODE...
- Page 5 (05) Keyfob AC-KF Available with IA-230 Kit or as accessory Contactless Tag AC-RFIDTAG Most of the devices are provided with either internal or external security tamper mechanism, please make sure the tamper spring is fully compressed when you install the devices.
- Page 6 (06) Plan your system: Before beginning the installation process, take some time to plan your system, decide where you want to locate the devices. Example Location tips: 1. Panel/Keypad should be accessible from a protected entry/exit point. Ensure that the Panel/KeyPad is not visible from the outside of the premises.
- Page 7 (07) Panel set up Standard PSTN phone landline socket The wall mounting holder should be always inserted because the panel has got a tamper switch.
- Page 8 (08) Panel Set Up Welcome to your Yale Intruder System please follow the on screen setup guide. Wecome to your Press to start setup. Yale Alarm System Press to select right setting. Press to confirm and move to next step.
- Page 9 (09) Panel setup: Adding a contactless tag Add a contactless tag Contactless tag Press button and enter your PIN code to access the main menu Scroll down using button and select “Contactless tag” and press Select “Add Tag” and press to enter the panel into learning mode Scan one tag to the panel reader...
- Page 10 (10) Device Installation: Test device signal Activate the devices by removing the battery strips. All devices in the kit are pre linked, If you have purchased extra accessories in addition to the kit, you’ll need to pair them to the system, following the instructions on page 18 Test your planned location of devices and check the signal strength on the panel screen.
- Page 11 (11) Device installation: Install the device in the desired location ~1.8m 2.1m Ø 5mm...
- Page 12 (12) Device installation: Install the device in the desired location max 10mm Clean the mounting surface before application with a suitable degreasing agent...
- Page 13 (13) Device installation: Install the device in the desired location Ø 5mm...
- Page 14 (14) Device installation: Install the device in the desired location Ø 5mm...
-
Page 15: Using The System
(15) Using the system Using the system Status LED: displays different LED colors to notify you of the system status. Contactless Tag reader: tap your contactless tag to disarm the system Full Arm: fully arm the Disarm: press the disarm button followed by system. - Page 16 (16) Using the system: Sensor setting options 5 different settings are available for PIR System Mode Motion Detectors and Door/Window contacts . Note: These settings do not apply to the Key Fob and Key Pad devices. Device Setting Burglar Home Omit Entry Away Entry 24 Hours...
- Page 17 (17) Using the system: Device setting All devices are pre set to "Entry" mode Select Device Edit Device Device settings Press button and enter your PIN code to access the main menu Select Set up press Select Device press Select Edit Device press Select Device name press...
- Page 18 (18) Using the system: Add device Add Device Select Device Press button and enter your Add Device PIN code to access the main menu Select Set up press Select Device press Select Add Device press Press Learn Button on device to add Access to alphabet Device information on screen - press...
- Page 19 Hereby, ASSA ABLOY Ltd., School Street, Willenhall, West Midlands, England Wv13 3PW declares that the radio equipment type IA-210, IA-220, IA-230 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.yale.co.uk/declaration-of-conformity...
- Page 20 YaleUK YaleSecurity YaleSecurityUK PACKAGING THE YALE BRAND, with its unparalleled global reach and range of products, reassures more people in more countries than any other consumer locking solution. THE ASSA ABLOY GROUP is the world´s leading manufacturer and supplier of locking solutions, dedicated to satisfying end-user needs for security, safety and convenience.