Yale HSA6200 Installation, Programming, Operating

Yale HSA6200 Installation, Programming, Operating

Hide thumbs Also See for HSA6200:

Advertisement

Siren-Based Alarm System
Installation · Programming · Operating
Keep this manual safe for reference and future maintenance
01902 635998
Yale Consumer Helpline

Advertisement

Table of Contents
loading

Summary of Contents for Yale HSA6200

  • Page 1 Siren-Based Alarm System Installation · Programming · Operating Keep this manual safe for reference and future maintenance 01902 635998 Yale Consumer Helpline...
  • Page 2: General System Overview

    Information and illustrations are subject to change within this document. Yale reserves the right to alter the specification and product design at anytime without notice. Yale® is a registered trademark. © 2006 ASSA ABLOY. All rights reserved.
  • Page 3: Table Of Contents

    Contents Recommended Installation Sequence Contents We recommend you follow the easy start sequence, 1 Location planning headings numbered 1-5. 2 Insert the batteries 3 Programming the Siren-based system 4 Mounting alarm devices 5 Using the system Adding accessories Changing the batteries Specifications Trouble shooting Key points...
  • Page 4: Location Planning

    Location planning Work out the best places to locate the devices for maximum protection. Having chosen the locations do not mount at this stage. Smoke detector Operating range • Mount in the middle of the ceiling at the top of All devices must be within 30 metres of the siren a stairwell, or on the centre of hallway ceilings unit and must not be mounted on or near large...
  • Page 5 • Mount as high as possible. • Do not aim a PIR at this door or window. Yale Keyfob remote control accessory Can be used outside the premises and kept on your keyring.
  • Page 6: Insert The Batteries

    The easiest way to get to know the system and get it up and running quickly is to get all the devices and accessories programmed on a table top before locating and mounting them. Fixing Yale screws X 4 Internal cover...
  • Page 7 (do not move) On/Off switch have no function on this model. Home Yale Smoke detector accessory 1 Remove the cover and insert the four AAA batteries as shown Door/window contacts...
  • Page 8: Programming The Siren-Based System

    Programming the Siren-based system (without control panel) The siren is the heart of the system. All components must be recognised by the siren. Learning process 4 Press the Learn button on the siren to exit the learn mode, the middle LED will flash once and there will be a single short beep to indicate that 1 Press and hold siren learn button for 1 second.
  • Page 9: Mounting Alarm Devices

    Mounting alarm devices WARNING Before mounting the keypad and siren ensure that the system tamper is disabled as described below. Testing whether the siren is fitted correctly: Disabling the system tamper 5 Press Arm with the Keypad/Keyfob. Before mounting it is important to disable the system tamper to avoid the siren sounding an 6 If there are 5 short beeps when armed, the tamper alarm.
  • Page 10 Mounting the Keypad: 4 Knock out the relevant holes on the base where the plastic is thinner. The center two knockout holes are for flat wall mounting while the 4 side holes are for corner mounting. Fixing Slots X 2 5 Drill holes into the wall using the knockout holes on the base as a template.
  • Page 11 2 Perform a radio range test by pressing Test/Learn Mounting the Help button Button on the door/window contact; siren will beep once. Each press on the button results 1 Break through the knockouts (where the plastic is a beep on the siren.This indicates the device thinner).
  • Page 12: Using The System

    Using the system Arm and disarm the system and practice using it. Trigger the alarm by arming the system and opening protected doors/windows and walking past PIRs. Now’s the time to set our pin code and show the rest of the family how simple it is to use. Setting or changing your keypad PIN •...
  • Page 13 Tamper alarm warning Using the smoke detector If any device tamper switches are disturbed a The smoke detector will indicate a fire by sounding tamper alarm will be activated with the siren its built-in siren, lighting the LED and activating the sounding and the strobe flashing.
  • Page 14: Adding Accessories

    Adding accessories To provide additional protection you can add extra door/window contacts, PIRs, keyfob remote controls, keypad remote controls, help buttons and smoke detectors. These are available separately from your local stockist. Adding devices for the first time Keyfob 1 Press the Arm and Home buttons together and See section 3 for adding extra devices in preparation continuously for 5 seconds until the LED stops for first time system installation.
  • Page 15: Changing The Batteries

    Changing the batteries Always use alkaline batteries or the correct type of coin cells as replacements because any other battery can cause problems with the operation of the system. Typical life of batteries is two years. Ensure the correct steps are taken when changing batteries in tamper protected devices. Siren 3 Using a screwdriver gently lever out the old battery.
  • Page 16 ASSA ABLOY Ltd. School Street, Willenhall West Midlands England, WV13 3PW ASSA ABLOY Ltd. School Street Willenhall West Midlands England WV13 3PW Model: HSA3400 Model: HSA3400 HSA6010 HSA3020 HSA6020 HSA3020 HSA3060 HSA6030 HSA3060 HSA3010 HSA6050 HSA3010 HSA3050 HSA6060 HSA3050 HSA3045 HSA6080 HSA3045 HSA3080...
  • Page 17: Specifications

    Specifications Specifications Specifications All devices Passive infra red (PIR) Help button All devices Passive infra red (PIR) detector Power supply 3 x AAA alkaline cells. 3 All devices Passive infra red (PIR) detector Power supply 3 x AAA al years typical domestic service life years typical domestic Detector Alarm processing Microprocessor...
  • Page 18: Troubleshooting

    Troubleshooting CONSUMER HELPLINE 01902 635998 If you have a problem with your alarm, Lines open 8am-5pm, Mon-Fri please call the helpline on: Siren PIR does not respond to movement Siren does not respond to keypad • Previous movement has triggered the PIR sleep •...
  • Page 20: Key Points

    See trouble-shooting, page 18 or require a new battery See how to change a battery, page 15 THE YALE BRAND, with its unparalleled global reach and Yale UK range of products, reassures more people in more countries School Street, Willenhall, than any other consumer locking solution.

Table of Contents