Dss Console - Panasonic KX-TA1232 Features Manual

General Features

DSS Console

Description
The Direct Station Selection (DSS) Console provides direct access to extensions and features
and busy lamp display.
The DSS Console must be programmed to work with a proprietary telephone (PT). System
Programming assigns the jack numbers of the DSS Console and its associated PT.
Up to four consoles can be installed per system. A PT can be paired with up to four DSS
Consoles. The paired telephone user can carry out the following operations using the DSS
Console:
• Direct access to an extension (Direct Station Selection)
• Quick access to an outside party (One-Touch Dialing)
• Easy transfer of an outside call to an extension
(The programmable One-Touch Transfer feature provides simplified operation.)
• Quick access to a system feature
The above functions are activated simply by pressing buttons on the console which were
pre-programmed as function buttons.
A DSS Console is provided with the following buttons listed below:
KX-T DSS Console:
Buttons
PF (Programmable Feature)
: The button is provided on the designated telephones.
(x): Shows the number of buttons only if multiple buttons are provided.
The functions of the listed buttons are described below:
DSS (Direct Station Selection) buttons: Used to access extensions. Every button is
programmed to correspond to an extension. Pressing a button allows the user to call the
corresponding extension. Every button is provided with an indicator (Busy Lamp Field), which
shows the current state of the corresponding extension as shown in the Table below:
Busy Lamp Field Table
Light
Off
On
To meet the user's various needs, DSS buttons can be changed to the other function buttons.
98
7040
DSS
(32)
(16)
State of
extension
Idle
Busy
Features Guide