Lunch / Break Service - Panasonic KX-TA1232 Features Manual

Lunch / Break Service

Description
The system supports both night and day modes of operation. The day mode includes lunch and
break mode. In the lunch/break mode, the DIL 1:1 destination of [457-458] or [463-464] is
effective; if it is not assigned, DIL 1:1 (Day)/DIL 1:N (Day) perform in the day mode as usual.
Using feature numbers, you can go from day mode to any other mode. However, from night
mode, you can only go to day mode.
Switching the Day / Lunch / Break / Night Mode
Day / Lunch / Break / Night mode can be switched either automatically at a pre-assigned time
or manually by a pre-assigned extension, operator or the manager at any desired time.
Class of Service programming determines which extensions can perform this.
Automatic Service: If you select the automatic switching mode, your system will switch
the day / lunch / break / night mode at the programmed time each day. The starting time of
the day / lunch / day / night mode can be set for each day.
Manual Service: If you select the manual switching mode, the pre-assigned extension,
operator or the manager can switch the day / lunch / break / night mode by dialing the
feature number.
Conditions
• A DIL 1:1 assignment in lunch / break mode:
[457-458] DIL 1:1 — Lunch / Break Group
[463-464] DIL 1:1 Extension —— Lunch / Break
• Assignments for day mode can be performed even on lunch / break time, except groups
assigned in program "[457-458] DIL 1:1 — Lunch / Break Group".
• A DIL 1:1 destination assigned in program "[457-458] DIL 1:1 — Lunch / Break Group"
is assigned a lunch / break group.
A lunch / break group can be assigned to up to 8 extensions (PT / SLT).
• The Extension, Voice Mail, Phantom Extension, DISA and Extension Group can be
assigned as a destination extension in the lunch/break mode in program [463-464] DIL 1:1
Extension —— Lunch / Break. When a DIL 1:1 destination is assigned in this program and
then an incoming call will arrive at an extension in the lunch/break mode, the call will first
be forwarded to the destination which has been assigned in this program. If this program
has been assigned to "Disable", the system selects the destination assigned in the program
[457-458] DIL 1:1 — Lunch / Break Group.
• Phantom extensions, floating numbers and voice mail extensions cannot be assigned to a
lunch / break group.
• If DIL 1:1 is not assigned for lunch / break mode, DIL 1:1 (Day) / DIL 1:N (Day) performs
in day mode as usual.
• Lunch / break extension group works same as "Ring Group". Also, it works as the data
assigned in program [990] System Additional Information, Area 06 - Bit 7, 6.
Features Guide
General Features
135