Doorbell/Door Chime (User-Supplied) - Panasonic KX-TA1232 Features Manual

General Features

Doorbell/Door Chime (user-supplied)

Description
You can receive not only ringing but also chiming as a doorphone call by connecting a
doorbell/door chime to the relay connected with a door opener, when a visitor presses a
doorphone button.
You can recognize which doorphone call is coming by assigning a distinctive chime pattern (8
patterns) to each doorphone. Also you can select the ringing way (Ring, Chime, Ring &
Chime) for each doorphone.
Conditions
• <Example>
— Taking the example that Doorbell/Door Chime is connected to Relay 4
When only an extension connected to jack 01 can receive a doorphone call, each setting is
as follows:
[607-608] Doorphone Ringing
Assignment —— Day / Night
[820] Doorphone Ringing Time
[821] Doorphone Ring/Chime
Selection
[822] Doorphone Chime Assignment
[823] Doorphone Chime Pattern
Selection
As for setting, refer to each program in the Programming Guide.
In case of setting each program from the default value to the applicable value following the
table as shown above:
— When a visitor presses the button of Doorphone 2:
• A doorbell/door chime, connected to Relay 4, chimes with Pattern 2.
• Extension 101 does not ring by setting "Doorphone 2: Chime" in program [821]
Doorphone Ring/Chime Selection.
• The Intercom button of Extension 101 flashes for 30 seconds. (PT only)
• During 30 seconds, you can answer the doorphone call at Extension 101 by going off-
hook. And then you can unlock Door Opener 2, connected to Relay 2, by pressing
"5".
94
Programming Default
jack 01: All doorphones
Other jacks: no doorphone
All doorphones: 30 s
All doorphones: Ring
All doorphones: Relay 4
All doorphones: Pattern 1 Doorphone 1: Pattern 1
Change
—
—
All doorphones: Chime
—
Doorphone 2: Pattern 2
Doorphone 3: Pattern 3
Features Guide