Section Six - Trouble Shooting - LaserShield Instant Security Systems Owner's Manual

PROBLEM OR
CONDITION
Master Alarm Unit
Low Battery
Master Alarm Unit
No AC Power
The MAU says "THERE WAS
AN UNREPORTED ALARM"
The MAU reports
"NO PHONE LINE"
The MAU announces a device
is "NOT REPORTING"
Wireless Detection
Powered Off
Wireless Detection
Low Battery
Wireless Detection
Unit is Bypassed
Wireless Detection
No AC Power
Keychain Remote
Low Battery
TROUBLE SHOOTING
SOLUTION
Check AC Power; Check circuit breakers; Check
Connections; Order new battery if AC Power is OK
Check AC Power; Check circuit breakers; Check
Connections; Order new battery if AC Power is OK
Press DISARM button to get system status. If you hear
"NO PHONE LINE, FIX THE CONDITION", check
premises phones for dial tone.
Check that the phone jack is securely connected to the
wall and that the other end is plugged into the back of
the MAU. Check for phones off hook. Repeat the
DISARM command. If the problem continues, please
contact Customer Care.
Repeat steps for unreported alarm.
Check all devices. Make sure connections are good.
Check for lights. If no lights on a WDU check the power
connection and press the on/off power button.
Check circuit breakers; make certain unit is plugged into
wall, check connections. Press power button. Otherwise
phone Customer Care.
Replace battery
Press Bypass Button to restore to system
Press ON/OFF Button; Check power connections
Replace with new battery
LaserShield
®
Instant Security System OWNER'S MANUAL Page 23