Managing The System By Telephone When You Are Away - LaserShield Instant Security Systems Owner's Manual

Hide thumbs Also See for Instant Security Systems:
Table of Contents

Advertisement

You can manage your System from a
touch-tone telephone or cell phone when
you are away from your property. You will
need to use the 5 digit Passcode printed on
your LaserShield
®
Emergency Card for this
process.
Accessing the Master Alarm Unit by
Phone
1.
This feature requires touch-tone
telephone service. Dial the same
telephone number to which your MAU is
connected. Do not call from a telephone
that is connected to the same line as the
MAU.
2.
Allow it to ring once, and then hang up.
3.
Wait 5 seconds, and then redial the
number. The MAU should answer on the
first ring.
Follow the voice instructions to enter
4.
your 5-digit Passcode by pressing the
keys on the telephone touch pad.
CONTROLLING WHILE AWAY
5.
You can do the following by telephone:
Press 1
to Arm the System
to Disarm the System
Press 2
Press 3
to change the volume of the MAU
speaker
Press 4
to listen to the System status
Press 5
to turn on the room monitoring
microphone to listen to activity in
the room
You can also make some refinements in how
your System works via touch tone phone.
You can disable Call Waiting, and set your
System to dial "8" or "9" for an outside line
as it dials RRMS.
To activate each of these features, you must
dial your MAU, allow it to ring once, and then
hang up.
Wait 5 seconds, and then redial the number.
The MAU will answer on the first ring.
Follow the voice instructions to enter your 5-
digit Passcode by pressing the keys on the
telephone touch pad. Then,
To disable Call Waiting, touch "7." If you
have call waiting, and if RRMS is calling
you back to verify an alarm, there is a
possibility that Call Waiting could interfere
with their call-back.
To dial 8 as part of your outgoing call
dialing, touch "8."
To dial 9 as part of your outgoing call
dialing, touch "9."
IMPORTANT- It is imperative that after
making changes that may affect the alarm's
communication, you test the alarm's
connection to RRMS by placing the MAU in
test, and triggering the System as indicated
on page 21.
®
LaserShield
Instant Security System OWNER'S MANUAL
Page 19

Advertisement

Table of Contents
loading

Table of Contents