DAINIPPON SCREEN PLATE RITE 4300 User Manual page 90

PT-R4300 USERS MANUAL
Normally
NOTE
checks whether the media type is set to positive or negative and then adjusts
exposure so that a positive image is output. If the image output from the host
computer is a negative image, select
However, for positives, since exposure occurs at the burning out border when
is selected, please set the RIP for negatives.
Layout:
1 2 3
Do not change the setting from multi output to single output with a plate
!
CAUTION
loaded on the drum. If you change from multi output to single output with
a plate loaded on the drum, multiple exposure may occur on the next
output, or the plate may be ejected without being burned out.
If a plate is loaded, eject the plate before changing the setting.
Normally single output is used. Use multi-output for the following situations:
NOTE
• When you want to output the same image several times to one plate while
changing exposure conditions such as the laser power each time after exposure
is complete.
• When you want to output several images to one plate without using pagination.
Multi-output is for exposure and test printing for such purposes as dot
!
CAUTION
gain adjustment. We do not recommend using a plate exposed using
multi-output for actual, finished-work printing. Take careful note of the
following when doing multi-output.
• Do not attempt to cancel output from the host computer by such means
as pressing [STOP] or [CANCEL] on the PT-R operation panel. Doing so
may cause faulty exposure.
• Do not set the next plate while an exposure is in progress.
3. Select the desired exposure condition and press [SAVE].
The save confirmation screen appears.
4. Press [YES] and then [OK] to save all of the condition settings. The data is
saved and you are returned to the offline screen.
If you want to cancel the data save, press [NO] and then [OK]. You then return
to the offline screen.
5-30
is selected and the host computer outputs a positive image. The PT-R
: Output a single image (output one image on one plate)
1
: Output multiple images (output several images on one plate)
Save Data ?
YES NO
ESC OK
Fig. 5-38 Save confirmation screen.
in the exposure condition setting screen.