2. Warning Messages
If a mistaken operation is performed or if it becomes necessary to warn the operator
for some reason, a four-digit hexadecimal error code "Exxxx" and an error message
like the following will appear in the display.
?
The last three digits of the four-digit hexadecimal error code describe the contents of
the error. The first digit of the error code is a code used inside the machine to
determine the degree of the error or the procedure for resetting the error.
For more details, refer to "4. Error Code/Error Message."
2.1 If There is a Mistaken Operation
A screen like the one shown in Fig. 7-16 above will appear and the buzzer will beep.
Press [OK] to return to the original screen (or its previous menu screen) and resume
operations.
2.2 Getting the Attention of the Operator during Operation
A screen like the one shown in Fig. 7-16 above will appear and the buzzer will beep
continuously until [OK] is pressed. When [OK] is pressed, the previous screen
reappears and operation resumes.
Error code
OK
Fig. 7-16 Warning message screen
Chapter 7 Messages
Error message
7-9