DAINIPPON SCREEN PLATE RITE 4300 User Manual page 51

2. Press [OK]. The buzzer sound will stop and the operation door open screen will
appear.
Press [Open] button to open door.
Set plate listed above.
CANCEL
Fig. 4-18 Operation door open screen
3. Press [OPEN]. The lock is released and the operation door slightly opens.
4. Place the specified plate on the insertion table and peel off the interleaf paper.
Be careful of the following when handling plates.
!
CAUTION
• When storing plates the environment should be the same as that for the
PT-R and the plates should be stored in a horizontal or inclined type plate
rack.
• Do not load plates into the PT-R that are warped or have bent corners.
• Do not load plates into the PT-R that have been punched.
Be sure to verify that there are no pieces of packaging or interleaf
paper remaining on either side of the plate. There is a danger of the
thermal laser starting a fire inside the PT-R.
Interleaf paper
No. 1 A4-8page
OPEN
CAUTION
Plate
Fig. 4-19 Setting a plate
Chapter 4 Basic Operation
Operation door
Insertion table
4-13