Setting The Printing Machine Information; Selecting The Plate - DAINIPPON SCREEN PLATE RITE 4300 User Manual

4. Setting the Printing Machine Information

Up to 15 sets of output conditions such as the media type, leading grip margin,
trailing grip margin and image centering can be associated and saved as printing
machine information. Up to 15 different printing machine information types can be
registered. The procedure for registering printing machine information is given in
4.1 to 4.8, below. (Refer to the setting configuration in "1.3 Steps for Setting the
Printing Machine Information.")
To save the data after you have completed the settings, press [OK] several times.
Display the image position fine adjustment screen (Fig. 5-34) and press [SAVE].
When the save confirmation screen is displayed (Fig. 5-35) do step 4 in section 4.8.

4.1 Selecting the Plate

Here, as an example, the setting of Printing machine 1 is explained.
1. Press [Set printing machine] and then press [OK] in the offline screen. The
printing machine information setting screen appears.
Fig. 5-23 Printing machine information setting screen
2. Select [1] and then press [OK].
The comment/plate setting screen appears.
Comment
Printing machine 1
Fig. 5-24 Comment/plate setting screen
Printing machine 1
1
2 Printing machine 2
3
Printing machine 3
4 Printing machine 4
Printing machine 5
5
ESC OK
Plate
Plate 1
ESC OK
NEXT
Move to next printing machine
information setting screen not
NEXT
currently displayed.
Comment
Selected plate
Copy form
Copy form
Use this to copy and register informa-
tion from another registered printing
machine information type.
Chapter 5 User Menu
5-21