2. Setting the Media Type
The information for a maximum of 15 media types can be registered. The procedure
for setting the information is as follows in 2.1 to 2.9. (Refer to the setting hierarchy
in "1.2 Steps for Setting the Media Type.")
To save the data after you have completed the settings, press [OK] several times.
Display the zoom value and absolute precision correction value setting screen (Fig.
5-15) and press [SAVE]. When the save confirmation screen is displayed (Fig. 5-16)
do step 3 in section 2.9.
2.1 Selecting the Negative/Positive Type
Here, as an example, the setting of Media Type 1 will be explained.
1. Select [Set media type] in the offline screen and press [OK].
The media type selection screen appears.
Fig. 5-6 Media type selection screen
2. Select [1] and then press [OK].
The negative/positive type selection screen appears.
Comment
Media Type 1
Fig. 5-7 Negative/positive type selection screen
Posi
Nega
Media Type 1
1
2
Media Type 2
3
Media Type 3
4
Media Type 4
5
Media Type 5
ESC
OK
Posi
Nega
ESC
OK
: Positive type (ink does not adhere to exposed parts of the plate)
: Negative type (ink adheres to exposed parts of the plate)
NEXT
Move to the media type selection
NEXT
screen not currently displayed.
Comment
Copy form
Chapter 5 User Menu
5-11