Extension Name Set - Panasonic KX-TD816/1232AL User Manual Addendum

004
Description
Selection
Default
Programming
Conditions
66
3.2 User Programming (Manager Programming)

Extension Name Set

Assigns names to the extension numbers programmed in program [003]
"Extension Number Set."
• Jack number: KX-TD816 – 01 through 16 (-1 / -2)
• Name: 10 characters (max.)
All jacks – Not stored
1. Enter 004.
Display: EXT Name Set
2. Press NEXT.
Display: Jack NO?->
3. Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering a jack number.
Display: #01-1:Not Stored
4. Enter a name.
For entering characters, see "Station Speed Dialling Number/Name
Assignment" in Section 2.2 "Programming."
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new name.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or SELECT and the
desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
• There is a maximum of 32 extension numbers for the KX-TD816 and 128
extensions for the KX-TD1232
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System
and 33 through 64 are for the Slave System.
• Program [003] "Extension Number Set" is used to assign extension
numbers.
• For an explanation of jack numbering, see "Rotation of jack number" on
page 29.
KX-TD1232 – 01 through 64 (-1 / -2)
(-1 = first part, -2 = second part)