Panasonic KX-TD816/1232AL User Manual Addendum page 158

5.2
Conditions
• DSS buttons can be changed to any of the following function buttons through Station
Programming:
a) Account Button
b) Another DSS Button (Every DSS button can be assigned to another extension number.)
c) Call Forwarding from Hunting Group Button
d) Call Pickup Deny Button
e) Call Waiting Button
f) CLIR Button
g) COLR Button
h) Conference (CONF) Button
i) Doorphone Call Forwarding to Outside Line Button
j) DND for DDI Button
k) Executive Busy Override Deny Button
l) FWD/DND Button
m) ISDN Service Button
n) Message Waiting (MESSAGE) Button
o) Night Button
p) One-Touch Dialling Button
q) One-Touch Dialling with Auto Hold Button
r) Paging Deny Button
s) Paralleled Telephone Connection Button
t) Pickup Dialling Button
u) Phantom Button
v) SAVE Button
w) Terminate Button
x) Two-Way Record Button
y) Two-Way Transfer Button
z) Voice Mail (VM) Transfer Button
• PF buttons can be changed to any of the following function buttons through Station
Programming:
a) Account Button
b) Conference (CONF) Button
c) FWD/DND Button
d) ISDN Service Button
e) One-Touch Dialling Button
f) One-Touch Dialling with Auto Hold Button
g) SAVE Button
h) Terminate Button
i) Voice Mail (VM) Transfer Button
• When the STORE button is pressed after programming, you will hear beep tones as follows:
— One beep : The entry is changed from the one that was previously stored.
— Two beeps : The entry is the same as what was previously stored.
158
DSS Console Features
†
†