Uniform Call Distribution (Ucd) - Panasonic KX-TD816/1232AL User Manual Addendum

4.2 DPT Features

Uniform Call Distribution (UCD)

Allows incoming calls to be distributed uniformly to a specific group of extensions called an
UCD group. Calls to an UCD group search for an idle extension in a circular way.
If all extensions in an UCD group are busy or not available, the incoming outside call will be
handled by the UCD Time Table.
Conditions
• UCD can be used in the following cases.
a) The floating number* of UCD is assigned as the Direct In Lines (DIL) 1:1 destination.
b) The floating number* of UCD is assigned as the Intercept Routing destination.
c) The floating number* of UCD is dialled from an extension.
d) The floating number* of UCD is assigned as the Direct Dialling In (DDI) destination.
e) The floating number* of UCD is assigned as the UCD Overflow destination.
• It is possible to set the log-in or log-out status on an extension basis.
Programming References
• System Programming — Installation Manual Addendum
[106] Station Hunting Type
[139] UCD Time Table
[813] Floating Number Assignment
Feature References
Log-In / Log-Out
* A Floating Number (FN) is a virtual extension number which appears to be an extension.
For more details, refer to the Installation Manual.
U
121