Panasonic KX-TD816/1232AL User Manual Addendum page 113

4.2 DPT Features
Phantom Extension
Allows you to route calls to a phantom extension. The call is sent to the extensions that
have the corresponding Phantom button.
A flexible CO or DSS button can be assigned as the Phantom button.
The lighting patterns of the Phantom button and status are as follows:
Off : Idle
Red : You are calling a phantom extension.
Flashing green rapidly : Incoming call
To call a phantom extension
1
To transfer a call to a phantom extension
1
To answer a phantom extension call
Conditions
• A phantom number must be assigned by System Programming before assigning the
Phantom button by Station Programming.
• If several extensions have the same phantom extension number, they will ring
simultaneously.
• A maximum of 128 phantom numbers can be assigned.
• The phantom number cannot be used for feature settings such as "Call Forwarding".
• Phantom button on a DSS Console:
Allows the operator to transfer a call to a phantom extension by the phantom button on the
DSS Console. An incoming call cannot be received at the phantom button on the DSS
Console, only the indicator turns red.
While the Phantom button indicator light is off ;
1. Lift the handset or press the SP-PHONE/MONITOR button.
2. Press the Phantom button.
• You may dial the phantom extension number instead.
• The Phantom indicator light turns red (steady).
During a conversation with an outside party;
1. Press the Phantom button.
• You may dial the phantom extension number after pressing the
TRANSFER button instead.
While the Phantom button indicator light is flashing green;
1. Press the Phantom button.
P
113