4.2
DPT Features
System Working Report
Allows you to print the system's working state recorded in the system. Only the extensions
which are assigned as the manager or operator can perform this feature.
1
2
7
9
3
1
or
4
Conditions
• You must connect the printer to the system when you print out the data.
Programming References
• System Programming — Installation Manual
[806]–[807] EIA (RS-232C) parameters — Port 1/Port 2
Feature References
System Working Report
1. Lift the handset or press the SP-PHONE/MONITOR button.
2. Dial the feature number (794).
3. Dial 1 or 0.
- 1 : print out the data
4
- 0 : clear the data
• You hear a confirmation tone.
• The display shows:
0
4. Lift the handset or press SP-PHONE/MONITOR button.
(→ see Installation Manual Addendum)
SWR Data Dump
SWR Data Clear
— (when printing out)
— (when clearing)
S
117