Contec AD12-64(PCI) User Manual page 27

Setup
Checking resources
Before operating the board, be sure to check the personal computer
resources (I/O addresses and interrupt level) assigned to the board.
For PCI compatible (Plug and Play Compliant) board, free
resources among the personal computer resources are assigned
automatically upon activation of the personal computer. Follow
the steps below to check the assigned resources.
(1) Run the resource check program "AIOPCI.EXE" stored in the
(2) Check the I/O addresses and interrupt level (IRQ) displayed on
Obtaining resource information
You can get information on the personal computer resources
assigned to the board by accessing the PCI BIOS. For the precise
method, refer the AIOPCI.C stored in the DOS directory on the
supplied FD.
20
DOS directory on the supplied floppy disk (FD).
the screen. Once the board has been set up correctly, it can be
used under MS-DOS.
AD12-64(PCI), AD12-16(PCI)