Configuring Is-Isv6 Maintenance And Diagnosis - Zte ZXR10 T600 User Manual

ZXR10 T600/T1200 User Manual (IPv6 Volume)
St- Command
ep
ZXR10(config-if)#
vel-1 | level-2]
Command
show isis adj
ZXR10#
show isis database
ZXR10#
show isis circuits
ZXR10#
show ipv6 route isis
ZXR10#
show isis topology
ZXR10#
debug isis all
ZXR10#
debug isis update
ZXR10#
debug isis adj
ZXR10#
debug isis spf
ZXR10#
debug isis snp-packets
ZXR10#
48 Confidential and Proprietary Information of ZTE CORPORATION
isis wide-metric <1-16777214>[le
Result: The interface parameters of IS-ISv6 have been config-
ured.
Configuring IS-ISv6
Maintenance and Diagnosis
To maintain and diagnose IS-ISv6, use the following commands.
Result: The maintenance and diagnosis of IS-ISv6 has been con-
figured.
Function
This configures the wide
metric on interface.
The range is 1–16777214,
and the priority is 10 for
level-1 and level-2 by default.
Function
This shows IS-ISv6 adjacency
of the router.
This shows IS-ISv6 database.
This shows IS-ISv6 interface
information.
This shows IS-ISv6 routing
table.
This shows IS-ISv6 topology.
This shows and tracks all the
debugging information about
the IS-IS.
This tracks and shows debugging
information of IS-ISv6 updating
events.
This tracks and shows
debugging information of
IS-ISv6 adjacency.
This tracks and shows the
debugging information of
IS-ISv6 route calculation
events.
This tracks and shows debugging
information of IS-ISv6 route
serial number packets.