Table of Contents
Advertisement
Unfolding the wind blocker
Folding the wind blocker outward before installing it is the easiest way to get it into the correct position
for installation.
Take the wind blocker out of its pouch.
Fold out both sides in the direction of the arrows ⇒
Fold both tabs outward (magnified view).
Installing the wind blocker
Turn the wind blocker so that the longer side faces toward the front of the car and the frame is at
the top.
Position the wind blocker horizontally against the rear seat backrest.
Gently insert the tabs on the back of the wind blocker into the slots (next to the rear seat backrests)
until they latch ⇒
f ig. 33
A (inset).
Pull the handle B in the direction of arrow
(2)
into the retainer.
Press the wind blocker down gently in the center until it clicks into place.
Repeat this process for the passenger side.
Raising and folding the wind blocker
For the wind blocker to function properly, it must be raised before driving. Fold the wind blocker back
down before removing.
To raise: Grasp the upper section of the wind blocker in the center and raise it until it clicks into
place ⇒
.
To fold: Grasp the upper section of the wind blocker in the center and fold it down gently toward
the rear of the vehicle ⇒
.
Removing the wind blocker
Press the handle B (magnified area) opposite the direction of the arrow
pin opposite the direction of the arrow
Gently lift the center of the wind blocker upward.
Slide both wind blocker tabs opposite the direction of the arrow out of the slots A (magnified area).
Repeat this process on the passenger side.
Folding the wind blocker closed
Lift the center of the wind blocker upward from the rear seats.
Fold both sides inward opposite the direction of the arrows ⇒
Fold both tabs inward (magnified area) opposite the direction of the arrow.
Stow the wind blocker in the pouch.
WARNING
Installing or removing the wind blocker by the side of the road near moving traffic can cause
accidents and serious personal injuries.
Always park the vehicle a safe distance from moving traffic when installing or removing
the wind blocker.
Never install or remove the wind blocker while driving.
f ig.
34.
(1)
and then slide the locking pin in the direction of arrow
(2)
out of the side retainer.
f ig.
34.
(1)
and slide the locking
Advertisement
Table of Contents
