Table of Contents
Advertisement
Park Distance Control (PDC) with rear lid assist
Fig. 143 Park Distance Control sensors.
Please first read and note the introductory information and heed the WARNINGS
The Park Distance Control System sensors are in the rear bumper.
Park Distance Control does not work while the CSC roof is being opened or closed.
Switching the Park Distance Control (PDC) system on and off
In order to
Automatically activate
PDC:
On vehicles equipped with Rear Assist, the Rear Assist camera display
Manually deactivate
Press a function selection button on the radio or the navigation system
the display:
Automatically
Shift out of Reverse (R). If the PDC display is activated, the display
deactivate PDC:
A chime sounds to tell you that the system is on. If the chime does not sound, PDC is not working.
Have the system inspected by an authorized Volkswagen dealer or an authorized Volkswagen Service
Facility.
Special considerations when using Park Distance Control
In some cases, the Park Distance Control and rear lid assist interpret water and ice on the sensors
as an obstacle.
If the distance remains the same, the warning tone volume decreases after a few seconds. If a
continuous tone sounds, its volume remains the same.
If the vehicle moves away from the obstacle, the beeping sound stops automatically. The beep
turns on again automatically if the vehicle approaches the obstacle again.
For vehicles with automatic transmissions, there is no beeping when the transmission is in Park
(P).
The volume of the audible signals can be adjusted by an authorized Volkswagen dealer or an
authorized Volkswagen Service Facility.
Rear lid assist only works when the vehicle is not moving.
Operation
Shift into Reverse (R) when the ignition is on or engine is running.
appears on the radio or the navigation system screen.
Radio
⇒ b ooklet
or ⇒ b ooklet
switches off after about 10 seconds.
OR: Drive forward faster than about 5-10 mph (10-15 km/h).
Navigation system
.
Advertisement
Table of Contents
