EFOY 600 User Manual page 27

5. Data Port Commands
Command
REMOTE [ON / OFF]
RESET↵
Output in the terminal program
This command replaces the Remote-On contact
contained in the CC1 cluster controller for external
control of the EFOY unit.
If the command is used without parameters, it will be
possible to check the current status of the "software
contact".
If you have imposed a software lock, a lock symbol
will appear on the remote control.
Example:
SFC>REMOTE↵
OFF
SFC>REMOTE ON↵
OK
SFC>REMOTE↵
ON
SFC>
This command replaces pressing the Reset button on
the operating panel.
Example:
SFC>RESET↵
Note: This is the only command that provokes no
response because it immediately triggers a reset of the
EFOY unit.
27