EFOY 600 User Manual page 17

4. Configuring the Data Port
Connect or disconnect
Connection status
Test the EFOY connection by pressing the "Enter" key.
The EFOY unit will respond with the prompt
SFC>
If there is no response, the connection is incorrect.
Check to see whether the interface adapter is connected
to the port (Com) and whether the connection is active.
You can modify the settings in the menu
"File\Properties" only after you close the connection.
If you change the port, you must reconfigure the settings
as described above. You can open the appropriate menu
by clicking the "Configure" button.
17