Ethernet Connection; Menu Bar And Toolbar - CipherLab 8000 User Manual

ETHERNET CONNECTION

If you choose to network with Ethernet, an Ethernet Cradle is necessary for the mobile
computer to team up with. Then set up the following:
On the mobile computer, set the output interface to "Ethernet Cradle" by user

application main menu | 3. Utilities | 1. Program Settings | 1. Upload Interface.
Set the Ethernet Cradle to work in Data Mode and configure correct IP and port

number of the host computer. (See Ethernet Cradle Guides.)
On the host computer, run Batch AG to enable Remote Console Data Transfer on

the Remote Console Settings window. See the BATCH AG user guide.
On the host computer, run Batch AG to disable or Enable Auto Update on the

Remote Console Settings window. See the BATCH AG user guide.
On the host computer, from the menu bar of Batch AG, select Transfer | Remote

Console Data Transfer to launch Remote Console.
MENU BAR & TOOLBAR
File Menu
Open
Save As
Rename
Delete File
Remove from List
Convert
Exit
Link Menu
Start
Restart
Opens a selected data file.
Saves a selected data file to a different file path.
Renames a selected data file.
Deletes a selected data file.
Removes a selected data file from the file list.
Converts a selected data file to Excel file format.
Closes Remote Console application.
Starts a Remote Console service session, throughout which the
mobile computer periodically updates data to the host computer
until one of the following comes up:
Remote Console service session stops (The Stop button

is pressed).
 Client mobile computer(s) quit uploading data.
Re-starts Remote Console service session.
Introduction
5